1 review for SKIPR Board with Quad-core 64bits SOC STM32F407VET6 onboard runs Klipper with EMMC for Voron VS Raspberry Pi RasPi
Rated 5 out of 5
gbnl –
first tested on my ” tronxy X5SA” only the frame uprights are still stock
moved on to my development machine a 800x800x1200mm 4545 frame corexy with 750w servo drives and rotating tilting mechanics printheads
its a little challenging to configure CAN-BUS but get on discord YouTube klipper and GitHub and its very easy, watch the jumper settings! all different voltage capable output settings
the basic setup on the emmc card is a good starting point for klipper (sorry marlin bye bye for me)
for running + 4 (nema 23 and heaters) canbus devices get a separate can breakout board to prevent the pcb traces from releasing white smoke so you can re route power easier ( connector for molex mini-fit (jr???or whatever) isn’t included by the board please update this to screw connection or something?
my printer runs fine on the skipr no hiccups or crashes when pushing everything to and beyond the limit of common sence (acceleration 10000 mm/s and 1000mm/s + corexy movement) are not a problem on 600×600 buildplate
gbnl –
first tested on my ” tronxy X5SA” only the frame uprights are still stock
moved on to my development machine a 800x800x1200mm 4545 frame corexy with 750w servo drives and rotating tilting mechanics printheads
its a little challenging to configure CAN-BUS but get on discord YouTube klipper and GitHub and its very easy, watch the jumper settings! all different voltage capable output settings
the basic setup on the emmc card is a good starting point for klipper (sorry marlin bye bye for me)
for running + 4 (nema 23 and heaters) canbus devices get a separate can breakout board to prevent the pcb traces from releasing white smoke so you can re route power easier ( connector for molex mini-fit (jr???or whatever) isn’t included by the board please update this to screw connection or something?
my printer runs fine on the skipr no hiccups or crashes when pushing everything to and beyond the limit of common sence (acceleration 10000 mm/s and 1000mm/s + corexy movement) are not a problem on 600×600 buildplate