Diode laser output power: 10W (note that this is light energy not electrical energy)
Laser focus: 0.06×0.08mm
Laser wavelength 455±5nm
Focusing method: fixed focus column + sliding device
Laser protection cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.
Engraving accuracy: 0.005mm
Engraving area size: the standard version is 380x385mm, which can be expanded to 935x400mm or 935x905mm
Machine power: about 84W
Type: mainboard-controlled air pump, voltage 12V, flow 30L/min
Air hose inner diameter: 7.5mm
Motherboard: 32-bit air-assisted motherboard, reserve Bluetooth, SD card offline printing function. (Upgrade Kit sold separately)
Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone
Cutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards
Operating software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.
Data transmission method: USB connection or Bluetooth wireless connection
Power Input: 100-240V AC, 50/60HZ Output: 12V 7A
Packing weight: 6.85kg
Packing size: 62.3*24*22.5cm
Certification: CE FCC RoHS FDA ICE certification
EU, UK, US
There are no reviews yet.